Get A Free 20FT Microphone Cable Free With Every Order! The Shure Beta 57A is excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Shure Beta 57A dynamic microphone provides optimal warmth and presence. The Shure Beta 57A is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Shure Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals. Shure Beta 57A Features: Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse Neodymium magnet for high signal-to-noise ratio output Minimally affected by varying load impedance Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Legendary Shure quality and reliability Shure Beta 57A Specifications: Type = Dynamic (moving coil) Frequency Response = 50 to 16,000 Hz Polar Pattern = Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency Output Level (at 1,000 Hz) = Open Circuit Voltage -51 dBV/Pa* (2.8 mV) *1 Pa = 94 dB SPL Impedance = Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing = Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Connector = Three-pin professional audio connector male XLR Case = Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille Adjustable Stand Adapter = Slip-in, adjustable through 180 degrees, with standard 5/8"-27 thread Net Weight = 275 grams (9.6 oz) Get Your Shure Beta 57A Today and Get A Free 20FT Mic Cable!

Shure Wired Microphone KSM27/SL Shure Wired Microphone KSM27/SL Description: The Shure KSM27 is a side-address condenser microphone with a cardioid polar pattern. Designed for studio use, but rugged enough for live applications, the KSM27 has an externally biased, 1-inch diaphragm, extremely low self-noise, and an extended frequency response specially tailored for vocal tracking and instrument recording. Model KSM27/SL comes with shock mount, Champagne finish, phantom power required. Shure Wired Microphone KSM27/SL Suggested Applications Voice -- solo, background, voice-over, broadcasting Acoustic instruments -- such as piano, guitar, drums, percussion, strings Electric instruments such as guitar and bass Wind instruments -- brass and woodwind Low frequency instruments -- such as double bass, electric bass, kick drum Overhead miking -- drums or percussion Ensembles -- choral or orchestral Room ambiance pick-up -- guitar amplifier or drums Shure Wired Microphone KSM27/SL Features: Cardioid polar pattern - the most commonly used pattern for both studio and live applications 1 inch, externally biased, ultra-thin, 24 Karat gold-layered, low mass, Mylar diaphragm provides superior transient response Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response and no crossover distortion, while minimizing harmonic and intermodulation distortions Premium electronic components and gold-plated internal and external connectors Subsonic filter eliminates rumble from mechanical vibration below 17 Hz Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs) 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect Integrated three-stage 'pop" protection grille reduces plosives and other breath noise Internal shock mount reduces handling and stand noise Get your Shure Wired Microphone KSM27/SL Today !!!

Shure Wired Microphone KSM32/CG Shure Wired Microphone KSM32/CG Description: The Shure KSM32 is a side-address, cardioid condenser microphone for highly critical studio recording and live sound productions. It offers an extended frequency response for an open, natural sounding reproduction of the original sound source. The KSM32/CG has a non-reflective, charcoal-gray finish for situations where less microphone visibility is preferred, such as live sound and stage production. It comes with the following accessories: ShureLock swivel mount Padded, zippered carrying bag Shure Wired Microphone KSM32/CG Applications: Some typical applications for the KSM32 are listed below. Microphone use, however, is a matter of personal taste. The KSM32 may be used for a variety of applications other than those listed. Voice -- solo, background, voice-over, broadcasting Acoustic instruments -- such as piano, guitar, drums,percussion, strings Wind instruments -- brass and woodwind Low frequency instruments -- such as double bass,electric bass, kick drum Overhead miking -- drums or percussion Ensembles -- choral or orchestral Room ambiance pick-up -- guitar amplifier or drums Both the acoustic environment and microphone placement have significant effects on the sound obtained when miking a source. You may need to experiment with these variables to achieve the best overall sound for each application. Get your Shure Wired Microphone KSM32/CG Today !!!

Shure Wired Microphone KSM44/SL Shure Wired Microphone KSM44/SL Description: The KSM44/SL is a multiple pattern (cardioid, omnidirectional, bidirectional), externally biased, dual large diaphragm condenser microphone with extremely low self-noise (7dB). Developed to meet the needs of studio recording musicians, the warm, rich sound of the KSM44 delivers exceptional performance, tailored to deliver vivid reproduction of voice for the most critical recordings. The KSM44 also offers great flexibility in a variety of recording applications, working well on acoustic and amplified instruments, as its capacity for managing high SPLs accommodates loud sound sources such as drums and guitar amplifiers. Shure Wired Microphone KSM44/SL Features: Dual 1 in., externally biased, ultra-thin, 2.5 micron, 24-karat gold-layered, low mass, Mylar diaphragms provide superior transient response Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions. Full-range frequency response (20 Hz - 20 KHz) for an extremely accurate reproduction of voice and instruments. Extremely low self noise (7 dBA) for critical studio vocal recording. Premium electronic components and gold-plated internal and external connectors. Subsonic filter eliminates rumble from mechanical vibration below 17 Hz. 15 dB attenuation switch for handling high input SPL sound sources. 3-position switchable low-frequency filter virtually eliminates unwanted background noise and controls proximity effect. Durable zinc die-cast housing and hardened low carbon steel grille to protect the cartridge from accidental drops or misuse. Uniform polar response provides natural off-axis response for critical recording. An integrated 3-stage pop protection grille to guard against wind and breath noise. An internal shock mount to reduce unwanted handling and stand noise. Shure Wired Microphone KSM44/SL :Performance Characteristics Extended frequency response Very low self-noise Exceptional low-frequency reproduction High output level High input SPL capability No cross-over distortion Extremely uniform polar response Superior common mode rejection and suppression of radio frequency interference Shure Wired Microphone KSM44/SL Accessories: Each KSM44/SL comes supplied complete with: Color-matched ShureLock elastic-suspension shock mount ShureLock swivel mount Protective velveteen pouch Locking aluminum carrying case Shure Wired Microphone KSM44/SL Applications The KSM44/SL is designed as a premium vocal microphone for studio recording. Microphone use, however, is a matter of personal taste. Here is a non-exhaustive list of common applications: Vocals: solo, background, voice-over Acoustic instruments : such as piano, guitar, drums, percussion, strings Wind instruments: brass and woodwind Low frequency instruments: such as double bass, electric bass, kick drum Overhead miking: