Seymour Duncan APB-1 Seymour Duncan APB-1 Description: Application: Modern-voiced, active replacement pickup for P-Bass®. Great for pop, blues, classic rock and heavy rock. Description: Compared to the Lightnin' Rods, the tone is more modern with sharper attack and more punch in the bass response. But unlike other active bass pickups, you don't get any brittleness. Includes logo covers. Complete setup: Available as a split-coil active pickup. Battery life is approximately 2,000 continuous hours. Often used together with STC-2 or -3 Tone Circuits for optimal tonal control. Includes mounting and wiring hardware. Includes logo covers. Guitars: For warmer toned ash, alder or basswood body instruments. Works especially well with rosewood fingerboards. Get your Seymour Duncan APB-1 today!

Seymour Duncan APH-1b Alnico II Pro Humbucker Application: Warm, moderate-output humbucker. Great for jazz, blues, classic rock and slide. Description: The Alnico 2 magnet and moderate windings yield a warm, sweet tone with more natural string vibration for great sustain. Classic rock players who get their distortion from the amp rather than the pickup love the APH-1. It allows them to back off the crunch and get beautiful clean tones with softer attack. Compared to the '59, the Alnico II Pro has a rounder sound with a spongier bass response. Comes with four-conductor hookup cable and no logo. Complete setup: Often the APH-1 is used in both neck and bridge positions. Or, in the neck with a higher output pickup like an SH-11 Custom Custom or SHPG-1b Pearly Gates for heavier rock or hotter blues sounds from the bridge position. Guitars: For brighter toned instruments. Works especially well with maple and ebony fingerboards. Also works great with hollow and semi-hollow body guitars. Available mods: Nickel or gold-plated cover. Trembucker. Seymour Duncan logo. Colors (humbucker spacing). Get your Seymour Duncan APH-1b Alnico II Pro Humbucker today!

Seymour Duncan APH-1n Alnico II Pro Humbucker Application: Warm, moderate-output humbucker. Great for jazz, blues, classic rock and slide. Description: The Alnico 2 magnet and moderate windings yield a warm, sweet tone with more natural string vibration for great sustain. Classic rock players who get their distortion from the amp rather than the pickup love the APH-1. It allows them to back off the crunch and get beautiful clean tones with softer attack. Compared to the '59, the Alnico II Pro has a rounder sound with a spongier bass response. Comes with four-conductor hookup cable and no logo. Complete setup: Often the APH-1 is used in both neck and bridge positions. Or, in the neck with a higher output pickup like an SH-11 Custom Custom or SHPG-1b Pearly Gates for heavier rock or hotter blues sounds from the bridge position. Guitars: For brighter toned instruments. Works especially well with maple and ebony fingerboards. Also works great with hollow and semi-hollow body guitars. Available mods: Nickel or gold-plated cover. Trembucker. Seymour Duncan logo. Colors (humbucker spacing). Get your Seymour Duncan APH-1n Alnico II Pro Humbucker today!

Seymour Duncan APS1 Alnico II Pro Staggered Seymour Duncan APS1 Alnico II Pro Staggered Description: Application: Vintage-correct true single-coil. Recommended for country, pop, surf, rockabilly, blues, ska and classic rock. Description: The hand ground Alnico 2 magnets and moderate windings (Heavy Formvar® wire) yield a warm, sweet tone with more natural string vibration for great sustain. Players who get their distortion from the amp rather than the pickup love the APS-1. It allows them to back off the crunch and get beautiful clean tones with softer attack. Compared to the SSL-1, the APS-1 has a rounder sound with a spongier bass response. Comes with waxed cloth hookup cable and vintage-style "keyed" bottom plate. Complete setup: Calibrated set available with RW/RP middle pickup. Guitars: For warmer toned ash, alder or basswood body instruments. Works with maple and rosewood fingerboards. Get your Seymour Duncan APS1 Alnico II Pro Staggered today!

Seymour Duncan APTL-1 Alnico II Pro Lead Seymour Duncan APTL-1 Alnico II Pro Lead Description: Application: Warm, moderate-output single-coil for Tele®. Great for country, pop, jazz, blues and classic rock. Description: The sand cast Alnico 2 magnets and moderate windings yield a warm, sweet tone with more natural string vibration for great sustain. Players who get their distortion from the amp rather than the pickup love the Alnico II Pro. It allows them to back off the crunch and get beautiful clean tones with softer attack. Compared to the Vintage '54, the Alnico II Pro has a rounder sound with a spongier bass response making it well suited to brighter instruments. Comes with waxed cloth hookup cable. Rhythm version comes with a chrome-plated brass cover. Complete setup: Available for both rhythm (neck) and lead (bridge) positions. Often used in the rhythm position and matched with a higher output lead pickup like the STL-2 Hot. Rhythm pickup is RW/RP relative to the lead pickup for hum canceling when both pickups are used together. Guitars: For brighter toned instruments. Works especially well with maple fingerboards. Get your Seymour Duncan APTL-1 Alnico II Pro Lead today!

Seymour Duncan APTR-1 Alnico Ii Pro Rhythm Seymour Duncan APTR-1 Alnico Ii Pro Rhythm Description: Application: Warm, moderate-output single-coil for Tele®. Great for country, pop, jazz, blues and classic rock. Description: The sand cast Alnico 2 magnets and moderate windings yield a warm, sweet tone with more natural string vibration for great sustain. Players who get their distortion from the amp rather than the pickup love the Alnico II Pro. It allows them to back off the crunch and get beautiful clean tones with softer attack. Compared to the Vintage '54, the Alnico II Pro has a rounder sound with a spongier bass response making it well suited to brighter instruments. Comes with waxed cloth hookup cable. Rhythm version comes with a chrome-plated brass cover. Complete setup: Available for both rhythm (neck) and lead (bridge) positions. Often used in the rhythm position and matched with a higher output lead pickup like the STL-2 Hot. Rhythm pickup is RW/RP relative to the lead pickup for hum canceling when both pickups are used together. Guitars: For brighter toned instruments. Works especially well with maple fingerboards. Get your Seymour Duncan APTR-1 Alnico II Pro Rhythm today!

Seymour Duncan PA-STK1n Parallel Axis Stack Seymour Duncan PA-STK1n Parallel Axis Stack Description: Application: Single-coil-size pickup for use with Parallel Axis Trembuckers. Suitable for pop, country, jazz, blues, funk, classic rock, and heavy rock. Description: Uses our patented Stack® hum-canceling technology combined with the benefits of the Parallel Axis design (USA Patent 4,524,667). The tone is classic single-coil with sharper attack, punchier bass, and compressed dynamics. Comes with four-conductor hookup cable. Complete setup: Recommended for the middle or neck position together with any of the Parallel Axis Trembuckers in the bridge position. Guitars: Recommended for all vibrato-equipped guitars. Get your Seymour Duncan PA-STK1n Parallel Axis Stack today!

Seymour Duncan SH-13 Dimebucker Seymour Duncan SH-13 Dimebucker Description: Application: Ultra high output blade humbucker built for aggressive playing styles. Recommended for rock, metal, hard-hitting solos and other heavy rock styles. Description: The Dimebucker uses a powerful ceramic magnet coupled with stainless steel blades for hard-hitting crunch. The SH-13 has both high d.c. resistance and a high resonant peak. The result is a high-output, aggressive humbucker with more treble bite and clarity than an SH-8 Invader; as well as punchy bass response and exceptional dynamics. The blades make the Dimebucker great for balanced bends. Comes with four-conductor hookup cable and its own form-fitting mounting ring. Complete setup: Recommended for bridge position. Dimebag used a '59 Model in the neck for P.A.F. tones. Guitars: For all instruments. The double blades make this pickup suitable for both humbucker and Trembucker string spacings. Players: Dimebag Darrell / Damageplan & Pantera, Mark Morton / Lamb of God Get your Seymour Duncan SH-13 Dimebucker today!

Seymour Duncan SH-5 Duncan Custom Seymour Duncan SH-5 Duncan Custom Description: Application: "P.A.F. on steroids" tone. Used for classic rock, heavy rock, funk, punk, R&B, metal and drop-tunings. Description: Beefed up Patent Applied For tone for a hard-driving, kickin' sound with the right balance of power, sustain, and distortion. This pickup cuts through with a distinctive high end and midrange attack. The ceramic magnet and custom coil design give it compressed dynamics, an enhanced harmonic structure, and a punchy bass. Perfect for dropped tunings without "mushing" out. Comes with four-conductor hookup cable. Complete setup: Recommended for bridge position. Often a Duncan Custom is paired with an SH-1 '59 in the neck for bigger P.A.F. tones in the bridge and vintage-correct P.A.F. tones in the neck. Guitars: For balanced and warm instruments. Works especially well with rosewood fingerboards. Available mods: Nickel or gold-plated cover. Trembucker. 7-string version. Colors (humbucker spacing). Players: Mike Chlasciak / Halford (bridge), Whitey Kirst / Iggy Pop (bridge), Rick Jackett / finger eleven (bridge), Will Adler & Mark Morton / Lamb of God (bridge) Get your Seymour Duncan SH-5 Duncan Custom today!

Seymour Duncan SJM2 Hot Seymour Duncan SJM2 Hot Description: Application: Boosted output true single-coil for warm instruments. Perfect for surf, jazz, blues, classic rock and heavy rock. Description: This direct replacement looks like a stock Jazzmaster® pickup, but "under the hood," it's a high octane "beast!" Compared to the SJM-1 Vintage, you get more output, boosted bass and lower-mid range response, and greater sustain. Does not include a cover. Complete setup: Available in a matched neck and bridge set. The neck version is RW/RP to create a humbucking effect when used together with the bridge model. Often, the Hot neck pickup is used together with the SJM-3 Quarter-PoundTM bridge pickup for tonal versatility. Guitars: For warmer toned ash, alder or basswood body instruments. Works especially well with rosewood fingerboards. Get your Seymour Duncan SJM2 Hot today!