Presonus BlueTube DP Presonus BlueTube DP Description: The new BLUETUBE DP two channel microphone/instrument preamplifier with Dual Path technology delivers the best of both worlds offering a solid state preamplifier stage and a tube preamplifier stage in each channel. This new Dual Path feature delivers the most flexible preamplifier in its price range by delivering both fat warm tube tone or invisible solid state transparency. The BLUETUBE DP replaces the original award-winning BLUETUBE as PreSonus' most affordable two-channel microphone/instrument preamplifier. Each channel of the BLUETUBE DP includes a -20dB pad, polarity reverse, 80Hz filter, and +48v phantom power. Front panel controls include solid state GAIN control and switchable on/off TUBE DRIVE. When the TUBE DRIVE is clicked off, the tube preamplifier stage is bypassed delivering ultra-quiet and transparent preamplification. The front panel also includes illuminated analog VU meters for each channel for easy visual monitoring. The BLUETUBE DP's inputs are professional-quality Neutrik Combo connectors for inputting both XLR and 1/4" TS sources. Outputs include both XLR and TS jacks allowing for ultimate flexibility. The PreSonus BLUETUBE Dual Path is great for enhancing all types of microphones including condensors, dynamics and ribbons, as well as instruments including keyboards, acoustic and electric guitars and bass. The BLUETUBE DP is the perfect front-end preamplifier for any project studio delivering a wide range of sounds and tonality all at an amazingly affordable price. Presonus BlueTube DP Features: Dual-Servo Microphone Preamplifier Front-End with Tube Line-Drive Amplifiers -20dB Pad 48V Phantom Power Phase Reverse Switch Eight-Segment Level Meter 12AX7 Low-Noise Tubes Warm, Silky Contours Fits in the BMRA Rack Adapter with the BlueMAX Output Section Includes XLR and 1/4" Connectors for Driving Two Separate Signal Paths 1/4", High-Z Input on the Front Panel for Instrument Preamplification Front Panels Back Panels Get your Presonus BlueTube DP today!

Presonus EQ3B Presonus EQ3B Description: The EQ3B is a three-band fully parametric single channel analog EQ with smooth highs and solid lows. Perfect for carving out unwanted frequencies or musically boosting frequencies that need to be empasized. It is a perfect compact EQ solution to customize and taylor your sound. The EQ3B features an 80Hz roll-off (to eliminate room rumble and increase clarity), +/-12 dB of boost/cut on three overlapping frequencies along with varible Q (bandwidth) for detailed narrow notching or wide musical shaping. The EQ3B is ultra quiet and is perfect solution for many applications including, vocals, guitar, bass, keyboards and more. Presonus EQ3B Features: Three fully parametric bands with overlapping frequencies. High pass rumble filter. Extremely quiet operation. Warm, wide dynamic range for recording or live. Presonus EQ3B Specifications: Input: XLR Impedance 10k Ohms TRS Impedance 10k Ohms Panel Controls Low Frequency Range 20Hz to 800Hz Mid Frequency Range 700Hz to 7kHz High Frequency Range 5kHz to 20kHz Bandwidth Adjust (Q) .1 to 10 Gain Adjust -12dB to +12dB High Pass Filter 80Hz Meters Blue Backlit VU Power Supply Type Linear Insert (TRS) Input 16VAC/1000mA Output XLR Balanced 51 Ohms Impedance 1/4" TRS Unbalanced 51 Ohms Impedance Performance THD+Noise (Unweighted) 0.006% at 0dB Noise Floor -98dB Signal to Noise >95dB Power Supply Rejection >98dB Power 16 Watts Physical Weight 5lbs. Dimensions 5.5 x 5.5 x 1.75 Mounting Universal Rack Tray Insert Chassis Steel Panel Brushed Aluminum Sides Cast Aluminum Front Panel Back Panel Get your Presonus EQ3B today!

Presonus Firepod Presonus Firepod Description: The FIREPOD is a complete 24-bit/96k recording studio combining eight high-quality PreSonus microphone preamplifiers, 24-bit/96k sample rate conversion and as an added bonus, Steinberg's Cubase LE 48-track recording software. The perfect hardware and software combination to deliver professional quality at an amazing price. The FIREPOD FireWire recording hardware interface is equipped with eight high-quality PreSonus microphone preamplifiers, 24-bit/96K analog to digital conversion along with SPDIF and MIDI inputs and outputs for professional quality convenient and compact no-hassle recording. The FIREPOD is loaded with eight custom-designed ultra low noise, high headroom microphone preamplifiers perfect for recording a wide variety of sources including vocals, drums, guitars, bass, piano, keyboards, guitars, synths, horns, orchestras, choirs, and more. Eight potentiometers are on the front panel to easily control the input level of each preamplifier. Inputs one and two of the FIREPOD can be switched between microphone or instrument level while inputs three thru eight can be switched between microphone or line input. Phantom power (+48V) is available on every channel in groups of four. Channels 1 and 2 feature fully balanced send and return TRS connectors on the rear of the rugged metal chassis for inserting outboard dynamics, EQ and effects processors. The FIREPOD has eight balanced TRS line outputs as well two balanced TRS MAIN outputs as well as CUE outputs for addtional monitoring. The FIREPOD also includes stereo headphone output on the front panel, as well as mix control to balance monitoring levels between mixed input and main output signals for zero-latency monitoring. Two channels of SPDIF input and output as well as MIDI input and output are also included. The FIREPOD comes ready-to-go with Steinberg's Cubase LE 48-track 24-bit/96K recording software, and is also compatible with many popular ASIO/WDM and Core Audio based applications. Front Panel Back Panel Presonus Firepod Features: High-Speed FireWire Network Audio Interface Up to 96K Sampling Rate 8 Discrete Microphone Preamps (+60dB gain) w/ Trim Control 8 Analog Mic/Line Inputs, 2 Instrument Inputs 8 Analog Line Outputs S/PDIF Digital Input and Output, MIDI Input and Output Balanced Send / Return for Channels 1 and 2 Zero Latency Monitoring Separate Main and Cue Mix Outputs Daisy-chain multiple FIREPOD's for additional inputs/outputs FREE Cubase LE Audio Production Software Included Presonus Firepod Specifications: Preamp Bandwidth 10Hz to 50kHz Preamp Input Impedance 1.3k Ohms Instrument Input Impedance 1M Ohms Preamp THD <0.005% Preamp EIN -125dB Preamp Gain 54dB Preamp Send Output Impedance 51 Ohms Preamp Return Input Impedance 10K Ohms Line Trim +/-20dB Line Input Impedance 10k Ohms TRS Output Impedance 51Ohms TRS Main Outputs Impedance 51 Ohms TRS Cue Outputs Im

Presonus TubePre Presonus TubePre Description: The TubePRE is the highest quality vacuum tube preamp in its class. Loaded with PreSonus' award winning dual servo preamplifier, the TubePre affordably delivers low noise tube warmth for vocals, guitars, bass guitars, synths and sound modules. The TubePre noticeably outperforms preamps in low cost mixers and recording interfaces making it an easy choice for anyone desiring to enhance their recordings with the magic of tubes. Presonus TubePre Features Award-Winning Dual Servo Tube-Preamp Low Price High Performance Tube Drive and Gain Control -20 dB Pad and Phase Reversal +48V Phantom Power 80Hz Rumble Filter Back-Lit VU Meter Great as a Direct Box Front Panel Back Panel Presonus TubePre Specifications: 12AX7 and dual-servo gain stages Capacitor-free gain stage for maximum fidelity and low noise XLR mic and high-Z instrument inputs on back panel XLR (balanced) and 1/4" (unbalanced) outputs on back panel Supports dual output of signal 10Hz-80kHz frequency response >90dB S/N ratio 94dB noise floor Variable gain and tube drive Gain: 3dB to +48dB Tube drive: 0dB to +20dB 48V phantom power -20dB pad and polarity reverse 80Hz rumble filter Large VU meter with blue backlight External wallmount power transformer Rackmountable with optional adapter Get your Presonus TubePre today!